First, you need to cut the carpet pad to fit each stair. It should measure from the stair exactly from where the tack strips will be, so you want to be as precise as possible.
However, if it is a bit too big, just cut the size one you figure it out and all will be good. These strips will need to be placed along the base of the next step and the end of the step you are covering. These areas are called the riser and the tread. The strips will be close together, but you want to ensure that there is enough space between them to tuck the excess carpet into, so make sure that they are not touching. Once the tackles strips are in place, use the hammer stapler tool to attach the pads to the stairs.
The carpet pad should be stapled along the entire length of the stair, and it should not be stapled into the strip below. The staple should be placed right in front of it. If you notice that there is a bit extra that you need to trim off the padding, do so before you staple it on. You will want to take the carpet pad and flatten it against the stair so that it is formed to the shape of it.
This should start taking on the shape of the stair the more you tighten the pad against. Once you have the carpet pad shaped against the stair, you want to use the stapler again to keep it in place.
You want to make sure that you have the right sizing of the carpet before you make your cuts , and you also want to add a few extra inches to be safe. This narrow rug runs down the center of the staircase, leaving some wood exposed on each side of the tread while still providing all the benefits of carpet, such as additional grip, shock absorption, and noise reduction.
Just take it one step at a time. Before you get started installing your carpet, you first need to determine the look you want in your home. There are two ways of installing carpet on stairs: the Hollywood method and the waterfall method. Next up: Time to choose a carpet. Of all of the options available to you, a machine-hemmed, prefabricated stair runner is the most convenient choice for easy installation.
Carpet runner can, however, be cut and hemmed from any wall-to-wall carpet roll; just know that each side must be stitched with a border to prevent fraying before you start. Start with the ideal width of your runner. Pre-hemmed runners are usually sold in one of a few widths, most commonly 27 and 32 inches, so choose the one that fits your tread size with as much or as little wood showing as desired.
If you plan to have a runner custom cut or if you need help visualizing how your stairs would appear partially covered with a carpet runner , try draping brown kraft paper or a flat sheet folded lengthwise to determine the right runner width. Next, to calculate the length of your stair runner, add your measurements for the depth of the stair tread and the height of the riser, then multiply this sum by the number of stairs. Prepare your stairs for carpet installation by installing tack strips, thin pieces of wood resembling yardsticks with tacks pointing upward.
These will grip the carpet backing and hold it in place. Cut your tack strips into lengths that are four inches shorter than the width of your chosen runner, then count out two strips for each stair.
Make certain that the strips angle in toward each other, so that the points of the tacks will come close to touching. On hardwood it may be necessary to tap the staple with a small hammer to drive it in fully. Stair-Carpet Installation Speed Installing carpet on stairs is a fairly quick job for straight stairs with no landings. For professional carpet installers, it usually takes between two and five minutes per stair to complete the entire staircase. What You Need Tape measure.
Carpet knife. Hammer stapler. Wall trimmer. Stair tool. A synthetic plush style in twisted or cut pile is always a safe option, while a looped style like Berber is occasionally avoided particularly if you have pets whose claws may catch in the carpet loops. Do you even need underlay for stairs? Underlay is not just for comfort, it also absorbs the shock from foot traffic.
As the stairs usually receives the highest foot traffic, underlay is essential for this area. Hook the carpet into the tackless strip at the top of the stairs. Apply glue to the stair riser if applicable and the tread, using the glue trowel. Stretch and pull the carpet down onto the glue to eliminate wrinkles. Secure the carpet onto the next tackless strip as you move down the stairs.
Staircase runner ideas are a classic part of hallway design for a reason.
0コメント